1. Appearance

The thread is adapted to the fabric, including color, texture, fastness, shrinkage, etc. The color of the buttons should be equal to the color of the fabric. The goods are neat, flat, and folded according to the rules, symmetrical from left to right, all parts are ironed flat, no leakage, no dead folds, no ends, no yarn wool, and all parts meet the standard requirements.

2. Sewing

There are many types of fabrics. In order to ensure the appearance and firmness of the product, different fabrics should choose different stitch lengths. For example, the stitch length of hard fabrics can usually be thinner, and the stitch length of soft fabrics can usually be denser. The line is straight and straight means that the line of each sewing part must not be twisted at will, and it must meet the needs of the appearance of the garment; the line should be regular, not stacked, without skipping stitches, throwing, the stitches are clear and beautiful, and the starting and ending stitches should be strong. , The length of the head thread should be suitable, there should be no missing needles or off-thread appearance, and the tightness of the stitching should be adapted to the thickness and texture of the fabric.

3. Color difference

The color difference rule is the demand for raw materials, that is, the demand for clothing fabrics. According to the relevant national regulations on chromatic aberration, the upper collar, bag fabric, and side seam of the trousers are the primary parts of the garment, the chromatic aberration is higher than grade 4, and the other external parts are grade 4. The color difference is equal to zero, and grades 4 to 1 represent a relatively progressive degree of fading, with grade 1 indicating severe.

4. Size

The size of custom-made clothing is the primary standard for the inspection of company work clothes. Since it is made to measure, it is naturally required to be more fit than the ready-made clothing purchased in the mall, comfortable to wear, suitable for job requirements, and loose and moderate is particularly important.

5. Defects

It is stipulated that only one defect is allowed for each independent part, that is to say, there is a defect on the garment piece, and no more defects are allowed on the patch pocket and bag cover in this independent part. The types of defects are different for different fabrics. Judgment must be done according to the rules and regulations.